Quirkory – Review

Guys I have been so excited to write and share this amazing little company with you today. You honestly don’t know how happy I am that this post is finally out there for you guys to read.

When I fall in love with something, I really do fall hard. Whenever I fall in love with a new company, I just want to shout about them to everyone in every way possible. It’s one thing I love the most about my blog – even if one person reads the post, at least one person has discovered the thing in question.

Today I will be sharing with you an independent company I discovered in 2019 and wanted to share going into a New Year!

I discovered Quirkory in August 2019 through their Kickstarter campaign A profusion of Eeveelutions & Lunar Spookies. Lots of enamel pin designers who I follow over on Instagram had posted about the campaign on their Instragram stories and Twitter and I couldn’t help but take a look myself over on Kickstarter myself.

I fell in love with the unique kawaii designs and I knew I had to back the campaign. The Eeveelutions are some of my favourite Pokemon to choose for my team in Pokemon games.

The campaign is basically a cross between the Eeveelutions and Greek Gods – which I thought was a really cool crossover. Growing up I loved learning about Greek mythology and I wish I’d taken it further with my studying of it in school.

The choice was so hard to make and I ended up settling on backing one design and in my brain (as I didn’t yet need to pick) opted for the Eevee Hera design. However, a few days later I ended up upping my campaign to three pins because I couldn’t just have one. I regret not backing all nine of the Eeveelution Greek God designs… ๐Ÿ˜ฆ

So, as I mentioned I opted for three enamel pins, which I am excited to show you today! I’ll also be showing you guys the free Eevee pin I received for backing three or more enamel pins AND an additional enamel pin Eevee Greek God design I was sent by Quirkory as a thank you for sharing them on my blog Instagram stories and supporting them just that little extra. As well as that, I will also be showing you their Galar Ponyta design, which I had on my backpack whilst out and about in Japan!

Disclaimer — Although not gifted for my blog, I will put an * next to the pin I was gifted by Quirkory, so you guys know I didn’t pay for it. ๐Ÿ™‚

The three designs I opted for were theย Leafeon – Artemis, Eevee – Hera and Umbreon – Hades, with the one I was sent from Quirkory being the Flareon – Hephaestus*.

All of the designs are perfect and so cute! I’m going to talk about each one, as I feel like they all deserve their own spotlight on my blog.

I love how in any order you make with Quirkory, they sent a cute little thank you note! Some stores out there do do this, but I just found this little note to be super cute! Especially the Inari and Mosted mascots for Quirkory at the bottom. SO KAWAII!

Speaking of Inari and Mosted, for both my Kickstarter awards and when I ordered my Galar Ponyta enamel pin, I got some cute little stickers of both the characters in my order. It makes me so happy to see the little mascots and I cannot wait to stick the stickers in or on one of my notebooks!

First of all I want to mention that although I love all of these pins I’m torn between the Umbreon and and Eevee pins as being my favourite. I love them both for completely different reasons to be honest with you! I think the whole, cute and light and cute and dark works so well and URGH I love.

Why this God for Leafeon? “Leafeon usually lives in lush forests. It has both animal-like appearance and features that make it look like a plants, thanks to its cellular structure which allows it to perform photosynthesis and purify the air! So it’s the right mix of flora and fauna and perfectly embodies Artemis, the Greek Goddess of hunt, forest, harvest, wild animals and female initiations. Personification of the crescent moon, she’s the daughter of Zeus and Latona. She lived in the woods with his reliable hunting dogs, always armed with a bow and golden arrows.”

Leafeon – Artemis – (link TBA) – This is on a rose gold enamel with a twin back. This is actually the first pin I saw from the collection, so really it was my reason for falling in love with the campaign in the first place! It was also the pins I was toying with picking if I had stuck with backing just one of the designs. Colour wise, this has to be my favourite out of the four Eeveelution Gods enamel pins I own. The pink background and yellow and green of Leafeon work so well together and it’s definitely attractive. I can imagine when I wear this enamel pin in particular on my clothing or backpack that it will fetch a lot of comments from people. One final think I love it the Leafeon’s mouth design. It’s very plain, but it looks so cute all the same! I love it!

Why this God for Eevee? “As Goddess of the family, women and protectress of marriage, she was the Queen Olympus and one of the most important deities. she was as jealous as revengeful and to her “misfortune” she married Zeus (who certainly wasn’t the ambassador of monogamy!) since she was jealous of her husband, she hated his favourite son Hercules… Whose human nature consequently led Hero to hate the entire humanity as well. Her symbols are the diadem, the peacock, the sceptre, the lotus and the pomegranate. Eevee is not vindictive for sure, and it loves indiscriminately anyone who gives some affection… That’s why it can be perfect queen and protectress of the family, The Eeveelutions Family!”

Eevee – Hera – (link TBA) – This is on gold enamel with a twin back. This is such a cute design and shouts Eevee to me! I love the little :3 smile that they decided to go with for the Eevee, it’s adorable!!! I love the level of detail that is put into the Eevee design and out of the four I have, this one has a “proper” crown on, which is due to the Greek God she is supposed to be. The little braces around it’s front legs are also really cute. This is definite up there with the Umbreon design as one of my favourites! It’s just so chubby, fluffy and cute! As Eevee is one of my favourite Pokemon, this one definitely has a soft spot. ๐Ÿ™‚

Why this God for Umbreon? “In the ancient Greek mythology he’s the God of the dead, King of the Netherworld and the shadows; he strongly masters the death with his faithful Cerberus, reigning undisturbed the underworld! He never cares about the earthbound and rarely gets out of his own world. ~ Just like our little Umbreon! Dark, mysterious and tenebrous, it hides in the darkness while waiting for its opponents, but he’s a lonely soul that never gets involved in matters that doesn’t belong to him.”

Umbreon – Hades – (link TBA) – This is on black enamel with a twin back. I LOVE that this is on black enamel, as it works so well for the darkness of the Umbreon design. I obviously can’t speak for the other designs, but out of all the enamel pins I have this is the biggest one. As I mentioned, the design is very dark all around with lots of black, navy and blue colours. The only “brighter” colours used are the yellow for the eyes and crown and pink for cheeks and mouth. I think the reason I fell in love with this design of Umbreon is due to the grumpy look on his face and his open mouth with a little snaggle tooth on show. It’s just perfect at showing how Hades is the God of the underworld, all whilst showing an adorable side to him as well.

Why this God for Flareon? “He was majorly known as the God of fire, but he also was the God of craftsmen, sculptors, metallurgy and volcanoes. As a smithing God, Hephaestus was the workman of the immortals: he made all weapons, furnishings and dwellings of the Gods in Olympus. Exiled from Olympus and confined in a volcano from birth, he never gave up and he had to devise clever stratagems to go back in! His main symbols are a smith’s hammer, anvil and fire. His forge was located under a volcano! Flareon has the same fiery temper! If it gets angry for an important reason, it can be a real hot-head and explosive! But it is also obedient and a very good “worker”. It can totally dominate fire and flames, since it can literally produce it thanks to its flame save inside its body.”

Flareon – Hephaestus* – (link TBA) – This is on gold enamel with a twin back. This is the design that Quirkory were kind enough to send me! I was able to pick it, by the way, it wasn’t randomly chosen (which was even nicer of Quirkory!). The Flareon pin is perfect, it really does show off everything about both the Pokemon and the Greek God! The eyes show that Flareon is mad/grumpy (if you will…) and with a flame in the background and his smith’s hammer, this is just perfect! I honestly love how grumpy the Flareon’s face it and I especially love how the mouth is covered by the floof of his chest, it makes him look even grumpier!

Eeveeloop Enamel Pin – (link TBA) – This is on gold enamel with a twin back. This was actually free with the Kickstarter campaign as I backed more than pins. This is so cute with the two little Eevee’s in the loop design. I thought that one of the Eevee’s was a normal colour and the other was shiny, but this doesn’t seem to be the case at all. Either way, the design is simple but adorable and perfect for any Eevee fan out there. One touch I really love on this pin (as it’s the first one I’m writing about) is how on the back of the enamel pin Quirkory have their name printed, but underneath is states, “Eeveeloop”. I’ve never seen this on an enamel pin to date and I think it’s really unique!

Eeveeloop Sticker (link) – The enamel pin design above is exactly the same as the sticker. This was included in the Kickstarter campaign too if you backed anything, which is a lovely little thank you really. This is available to buy on their Etsy store now, which I have linked above. If you fancy bagging yourself a cute little sticker, then go and grab one now! The stickers from Quirkory are adorable.

Eevee Greek God’s Stickers (link) – As I backed three enamel pins I was able to pick two stickers to add to my order… However Quirkory being the beauts that they are sent me four! I picked the Glaceon – Atherra and Flareon – Hephaestus designs to have as stickers, so Quirkory sent me the Leafeon – Artemis and Umbreon – Hades designs too. I feel so lucky to have received so many goodies from Quirkory. They’ve definitely left me feeling loved with this parcel. :’)

All the stickers are of a matte texture and so cute! They’re a decent size and as I mentioned, would be great to stick on or in a notebook/diary, or maybe even on a phone case to customise it to whatever you see fit!

Lilac Galar Ponyta (link) – The Galar Ponyta pins is by far one of my favourite enamel pins in my collection… Seriously! I have never seen an enamel pin printed on a different colour enamel until I bought this. This is on lilac enamel, which really makes the pastel colours of the Ponyta’s mane and tail. These colours are pink, blue and yellow, with the other sections of Ponyta being white and lilac from the metal. If this is in the gold enamel, these parts of course wouldn’t be lilac. I honestly love this pin so much that it even came with me to Japan on my backpack! ๐Ÿ˜€ Sadly, I didn’t get any comments on it. ๐Ÿ˜ฆ

The one thing I want to comment on here with Quirkory’s enamel pins and in turn which is one of my favourite things is the quality. They feel and look amazing, which is perfect. I feel like I’m only really starting to understand good quality enamel pins, even though I’ve been collecting for two years now. These feel smooth to run your finger across.

At the time of writing this blog post, the Eeveelution pins (or any on the Kickstarter for that matter) aren’t available to buy at the moment. Quirkory are aiming for all of the Kickstarter pins to be shipped out first before they decide to sell any via their Etsy store. They are aiming for the second half of February for the pins to be up on Etsy! So make sure to keep eyes peeled on their Instagram page, Etsy store and even my blog! I will be linking back to them all as soon as they hit the store.

I’m already planning to pick up the other five Eeveelution Greek God designs as and when they go for sale on their store.

In case you’re curious the other Eeveelution designs are below:

Vaporeon – Poseidon – (link TBA)

Sylveon – Aphrodite – (link TBA)

Espeon – Apollo – (link TBA)

Jolteon – Zeus – (link TBA)

Glaceon – Atherra – (link TBA)

Halfway through working on this review for Quirkory, I decided to have a mini internet with them about their brand and what they hope for the future! So I will include any exciting things coming this year for them!

  • During this year, Quirkory would like to vary and expand their range of products, starting with the launch of plushies, bags/ita bags, plaids and mugs (for the latter they have special plans in mind).
  • Inari & Mosted (who they are created more stickers of AND a webtoon/comic strip, which I am so excited for!), The Witcher (which is something they really love!), original creations and contents which are base on animals and nature (which is their biggest love!)
  • A project they particularly care about will be titled “Wrongies”, which is inspired by everyday life and by the movie Ugly Dolls. They have already designed some pins with the purpose of pushing people to love and accept themselves more, as well as the things we own, because lately everyone is increasingly focusing on defects and flaws way too much. This sounds amazing and I’m so interested in how these will look in the future!
  • Theyย will not discontinue from making fan-arts in the future!!! Which is great news, because they’re so amazing at doing them. ๐Ÿ™‚
  • Finally, Animal Crossing! I have shown a sneak peak of what they are showing on their Instagram of one of the first sneak peaks of Animal Crossing. IF you love the style that Quirkory go for and would like to see them design and certain Animal Crossing character, then make sure to head over to their Instagram page and TELL THEM WHO YOU WANT TO SEE! ๐Ÿ˜€ I really want to see Isabelle, Bea, Cookie, Goldie and Lucky. I love my doggies in Animal Crossing. ๐Ÿ™‚

Quirkory opened their Patreonย  about a year ago, but at the moment it’s quiet… Before they announce the launch of it, they are working hard to still prepare for everything and perfect it ready for when it launches. Quirkory want their Patreon to be different, special and yet affordable for everything – so not just a pin club, which I love! It shows that they’re really thinking about their customers. ๐Ÿ™‚

So that is it for my review of Quirkory! I have tried to include as much information as I can think of, as well as snippets from the mini interview I conducted with Quirkory! I will also of course link below to their store and social media platforms:

Store (Etsy)

Twitter

Instagram

What do you guys think of Quirkory? Their designs are cute, right? Would you look into buying from them in the future? If so, what would you pick up? Make sure to let me know in the comments!

Until next time, take care all and I hope you’re having a lovely weekend so far.

Footer